What are the threaded holes in Manfrotto camera brackets?
The following is the underside of a ball headed Manfrotto camera mounting bracket:-
In addition to the expected threaded screw in the middle, there are two threaded holes either side. I don't recall getting any hardware for these when I bought it. What are they for?
tripod-heads ball-head
asked 5 hours ago
Paul UszakPaul Uszak
606510
add a comment |
The following is the underside of a ball headed Manfrotto camera mounting bracket:-
In addition to the expected threaded screw in the middle, there are two threaded holes either side. I don't recall getting any hardware for these when I bought it. What are they for?
tripod-heads ball-head
asked 5 hours ago
Paul UszakPaul Uszak
606510
add a comment |
The following is the underside of a ball headed Manfrotto camera mounting bracket:-
In addition to the expected threaded screw in the middle, there are two threaded holes either side. I don't recall getting any hardware for these when I bought it. What are they for?
tripod-heads ball-head
asked 5 hours ago
Paul UszakPaul Uszak
606510
The following is the underside of a ball headed Manfrotto camera mounting bracket:-
In addition to the expected threaded screw in the middle, there are two threaded holes either side. I don't recall getting any hardware for these when I bought it. What are they for?
tripod-heads ball-head
tripod-heads ball-head
asked 5 hours ago
Paul UszakPaul Uszak
606510
asked 5 hours ago
Paul UszakPaul Uszak
606510
asked 5 hours ago
Paul UszakPaul Uszak
606510
asked 5 hours ago
Paul UszakPaul Uszak
606510
asked 5 hours ago
Paul UszakPaul Uszak
606510
606510
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
Those holes are for a vhs pin — apparently a thing used to keep big heavy tape-recorder cameras in alignment. I don't think there's any use for still cameras.
answered 4 hours ago
mattdmmattdm
121k40356650
add a comment |
The tripod mount receivers on many video cameras have an additional slot next to the 1/4-20 threaded hole. This hole is for an alignment pin that orients the camera in the right direction and also assists in preventing the camera from twisting on the plate.
The holes in your Manfrotto 200PL quick release plate are for an alignment pin that fits into the additional (non-threaded) hole in the base on video cameras. The two holes in the QR plate are to allow the user to choose front or rear orientation of the plate when used with a video camera that has the hole for an alignment pin. Your Manfrotto 200PL plate should have been supplied with such a pin (they're typically black plastic, but were originally metal a LONG time ago) as well as a 3/8-16 to 1/4-20 adapter bushing for the main screw.
At least a few Nikon "still" cameras also seem to have a hole for the alignment pin. The Nikon D850, for example:
answered 3 hours ago
Michael CMichael C
133k7151375
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "61"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fphoto.stackexchange.com%2fquestions%2f105856%2fwhat-are-the-threaded-holes-in-manfrotto-camera-brackets%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Those holes are for a vhs pin — apparently a thing used to keep big heavy tape-recorder cameras in alignment. I don't think there's any use for still cameras.
answered 4 hours ago
mattdmmattdm
121k40356650
add a comment |
Those holes are for a vhs pin — apparently a thing used to keep big heavy tape-recorder cameras in alignment. I don't think there's any use for still cameras.
answered 4 hours ago
mattdmmattdm
121k40356650
add a comment |
Those holes are for a vhs pin — apparently a thing used to keep big heavy tape-recorder cameras in alignment. I don't think there's any use for still cameras.
answered 4 hours ago
mattdmmattdm
121k40356650
Those holes are for a vhs pin — apparently a thing used to keep big heavy tape-recorder cameras in alignment. I don't think there's any use for still cameras.
answered 4 hours ago
mattdmmattdm
121k40356650
answered 4 hours ago
mattdmmattdm
121k40356650
answered 4 hours ago
mattdmmattdm
121k40356650
answered 4 hours ago
mattdmmattdm
121k40356650
121k40356650
add a comment |
add a comment |
The tripod mount receivers on many video cameras have an additional slot next to the 1/4-20 threaded hole. This hole is for an alignment pin that orients the camera in the right direction and also assists in preventing the camera from twisting on the plate.
The holes in your Manfrotto 200PL quick release plate are for an alignment pin that fits into the additional (non-threaded) hole in the base on video cameras. The two holes in the QR plate are to allow the user to choose front or rear orientation of the plate when used with a video camera that has the hole for an alignment pin. Your Manfrotto 200PL plate should have been supplied with such a pin (they're typically black plastic, but were originally metal a LONG time ago) as well as a 3/8-16 to 1/4-20 adapter bushing for the main screw.
At least a few Nikon "still" cameras also seem to have a hole for the alignment pin. The Nikon D850, for example:
answered 3 hours ago
Michael CMichael C
133k7151375
add a comment |
The tripod mount receivers on many video cameras have an additional slot next to the 1/4-20 threaded hole. This hole is for an alignment pin that orients the camera in the right direction and also assists in preventing the camera from twisting on the plate.
The holes in your Manfrotto 200PL quick release plate are for an alignment pin that fits into the additional (non-threaded) hole in the base on video cameras. The two holes in the QR plate are to allow the user to choose front or rear orientation of the plate when used with a video camera that has the hole for an alignment pin. Your Manfrotto 200PL plate should have been supplied with such a pin (they're typically black plastic, but were originally metal a LONG time ago) as well as a 3/8-16 to 1/4-20 adapter bushing for the main screw.
At least a few Nikon "still" cameras also seem to have a hole for the alignment pin. The Nikon D850, for example:
answered 3 hours ago
Michael CMichael C
133k7151375
add a comment |
The tripod mount receivers on many video cameras have an additional slot next to the 1/4-20 threaded hole. This hole is for an alignment pin that orients the camera in the right direction and also assists in preventing the camera from twisting on the plate.
The holes in your Manfrotto 200PL quick release plate are for an alignment pin that fits into the additional (non-threaded) hole in the base on video cameras. The two holes in the QR plate are to allow the user to choose front or rear orientation of the plate when used with a video camera that has the hole for an alignment pin. Your Manfrotto 200PL plate should have been supplied with such a pin (they're typically black plastic, but were originally metal a LONG time ago) as well as a 3/8-16 to 1/4-20 adapter bushing for the main screw.
At least a few Nikon "still" cameras also seem to have a hole for the alignment pin. The Nikon D850, for example:
answered 3 hours ago
Michael CMichael C
133k7151375
The tripod mount receivers on many video cameras have an additional slot next to the 1/4-20 threaded hole. This hole is for an alignment pin that orients the camera in the right direction and also assists in preventing the camera from twisting on the plate.
The holes in your Manfrotto 200PL quick release plate are for an alignment pin that fits into the additional (non-threaded) hole in the base on video cameras. The two holes in the QR plate are to allow the user to choose front or rear orientation of the plate when used with a video camera that has the hole for an alignment pin. Your Manfrotto 200PL plate should have been supplied with such a pin (they're typically black plastic, but were originally metal a LONG time ago) as well as a 3/8-16 to 1/4-20 adapter bushing for the main screw.
At least a few Nikon "still" cameras also seem to have a hole for the alignment pin. The Nikon D850, for example:
answered 3 hours ago
Michael CMichael C
133k7151375
edited 3 hours ago
answered 3 hours ago
Michael CMichael C
133k7151375
answered 3 hours ago
Michael CMichael C
133k7151375
answered 3 hours ago
Michael CMichael C
133k7151375
133k7151375
add a comment |
add a comment |
Thanks for contributing an answer to Photography Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fphoto.stackexchange.com%2fquestions%2f105856%2fwhat-are-the-threaded-holes-in-manfrotto-camera-brackets%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
