Raspberry pi 3 B with Ubuntu 18.04 server arm64: what chip

How can I find what chip I have (what version of raspberry pi) with Ubuntu 18.04 server for arm64? What file can I check or what command can I run? /proc/cpuinfo does not have return useful information, just some generic details without mention of the pi.

asked 1 hour ago

anvoice

165

New contributor

The cat /proc/cpuinfo should produce a Revision number that corresponds to the board. See: raspberrypi.org/documentation/hardware/raspberrypi/…

– Terrance
50 mins ago

It doesnt't, at least for Ubuntu 18.04 server. It only says "revision : 4".

– anvoice
14 mins ago

add a comment |

asked 1 hour ago

anvoice

165

New contributor

The cat /proc/cpuinfo should produce a Revision number that corresponds to the board. See: raspberrypi.org/documentation/hardware/raspberrypi/…

– Terrance
50 mins ago

It doesnt't, at least for Ubuntu 18.04 server. It only says "revision : 4".

– anvoice
14 mins ago

add a comment |

asked 1 hour ago

anvoice

165

New contributor

18.04 raspberrypi

asked 1 hour ago

anvoice

165

New contributor

asked 1 hour ago

anvoice

165

New contributor

asked 1 hour ago

anvoice

165

New contributor

asked 1 hour ago

anvoice

165

asked 1 hour ago

anvoice

165

New contributor

anvoice is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.

The cat /proc/cpuinfo should produce a Revision number that corresponds to the board. See: raspberrypi.org/documentation/hardware/raspberrypi/…

– Terrance
50 mins ago

It doesnt't, at least for Ubuntu 18.04 server. It only says "revision : 4".

– anvoice
14 mins ago

add a comment |

The cat /proc/cpuinfo should produce a Revision number that corresponds to the board. See: raspberrypi.org/documentation/hardware/raspberrypi/…

– Terrance
50 mins ago

It doesnt't, at least for Ubuntu 18.04 server. It only says "revision : 4".

– anvoice
14 mins ago

The cat /proc/cpuinfo should produce a Revision number that corresponds to the board. See: raspberrypi.org/documentation/hardware/raspberrypi/…

– Terrance
50 mins ago

It doesnt't, at least for Ubuntu 18.04 server. It only says "revision : 4".

– anvoice
14 mins ago

add a comment |

1 Answer
1

active

oldest

votes

The command lscpu is what you look for. Here's an example output of the command (taken on my Raspberry Pi 3B+):

lscpu

Which produces the following output:

Architecture:          armv7l

Byte Order:            Little Endian

CPU(s):                4

On-line CPU(s) list:   0-3

Thread(s) per core:    1

Core(s) per socket:    4

Socket(s):             1

Model:                 4

Model name:            ARMv7 Processor rev 4 (v7l)

CPU max MHz:           1200,0000

CPU min MHz:           600,0000

BogoMIPS:              38.40

Flags:                 half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32

Another option is the inxi command (you might have to install it if not present with sudo apt install inxi). The flags to use are as follows:

inxi -C

Which produce the following output:

CPU:       Quad core ARMv7 rev 4 (v7l) (-MCP-) (ARM) 

           clock speeds: max: 1200 MHz 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz

As for identifying which chip is build on your board you can check the chip on the board as well the manufacturers website for info and as well as the different selling outlets for getting technical details.

edited 1 hour ago

answered 1 hour ago

Videonauth

24.7k1273102

Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?

– anvoice
1 hour ago

Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.

– Videonauth
1 hour ago

I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.

– anvoice
1 hour ago

Otherwise your only option is to check the model number and so on from the chips body. There is not really much more information left to get. You can try sudo inxi -MCmG but on my raspeberry I got not much info out of this.

– Videonauth
1 hour ago

1

As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.

– Videonauth
51 mins ago

|
show 1 more comment

StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});

}
});

anvoice is a new contributor. Be nice, and check out our Code of Conduct.

draft saved

draft discarded

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1130244%2fraspberry-pi-3-b-with-ubuntu-18-04-server-arm64-what-chip%23new-answer', 'question_page');
}
);

Post as a guest

Name

Required, but never shown

1 Answer
1

active

oldest

votes

1 Answer
1

active

oldest

votes

The command lscpu is what you look for. Here's an example output of the command (taken on my Raspberry Pi 3B+):

lscpu

Which produces the following output:

Architecture:          armv7l

Byte Order:            Little Endian

CPU(s):                4

On-line CPU(s) list:   0-3

Thread(s) per core:    1

Core(s) per socket:    4

Socket(s):             1

Model:                 4

Model name:            ARMv7 Processor rev 4 (v7l)

CPU max MHz:           1200,0000

CPU min MHz:           600,0000

BogoMIPS:              38.40

Flags:                 half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32

Another option is the inxi command (you might have to install it if not present with sudo apt install inxi). The flags to use are as follows:

inxi -C

Which produce the following output:

CPU:       Quad core ARMv7 rev 4 (v7l) (-MCP-) (ARM) 

           clock speeds: max: 1200 MHz 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz

edited 1 hour ago

answered 1 hour ago

Videonauth

24.7k1273102

Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?

– anvoice
1 hour ago

Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.

– Videonauth
1 hour ago

I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.

– anvoice
1 hour ago

Otherwise your only option is to check the model number and so on from the chips body. There is not really much more information left to get. You can try sudo inxi -MCmG but on my raspeberry I got not much info out of this.

– Videonauth
1 hour ago

1

As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.

– Videonauth
51 mins ago

|
show 1 more comment

The command lscpu is what you look for. Here's an example output of the command (taken on my Raspberry Pi 3B+):

lscpu

Which produces the following output:

Architecture:          armv7l

Byte Order:            Little Endian

CPU(s):                4

On-line CPU(s) list:   0-3

Thread(s) per core:    1

Core(s) per socket:    4

Socket(s):             1

Model:                 4

Model name:            ARMv7 Processor rev 4 (v7l)

CPU max MHz:           1200,0000

CPU min MHz:           600,0000

BogoMIPS:              38.40

Flags:                 half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32

Another option is the inxi command (you might have to install it if not present with sudo apt install inxi). The flags to use are as follows:

inxi -C

Which produce the following output:

CPU:       Quad core ARMv7 rev 4 (v7l) (-MCP-) (ARM) 

           clock speeds: max: 1200 MHz 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz

edited 1 hour ago

answered 1 hour ago

Videonauth

24.7k1273102

Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?

– anvoice
1 hour ago

Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.

– Videonauth
1 hour ago

I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.

– anvoice
1 hour ago

Otherwise your only option is to check the model number and so on from the chips body. There is not really much more information left to get. You can try sudo inxi -MCmG but on my raspeberry I got not much info out of this.

– Videonauth
1 hour ago

1

As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.

– Videonauth
51 mins ago

|
show 1 more comment

The command lscpu is what you look for. Here's an example output of the command (taken on my Raspberry Pi 3B+):

lscpu

Which produces the following output:

Architecture:          armv7l

Byte Order:            Little Endian

CPU(s):                4

On-line CPU(s) list:   0-3

Thread(s) per core:    1

Core(s) per socket:    4

Socket(s):             1

Model:                 4

Model name:            ARMv7 Processor rev 4 (v7l)

CPU max MHz:           1200,0000

CPU min MHz:           600,0000

BogoMIPS:              38.40

Flags:                 half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32

Another option is the inxi command (you might have to install it if not present with sudo apt install inxi). The flags to use are as follows:

inxi -C

Which produce the following output:

CPU:       Quad core ARMv7 rev 4 (v7l) (-MCP-) (ARM) 

           clock speeds: max: 1200 MHz 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz

edited 1 hour ago

answered 1 hour ago

Videonauth

24.7k1273102

The command lscpu is what you look for. Here's an example output of the command (taken on my Raspberry Pi 3B+):

lscpu

Which produces the following output:

Architecture:          armv7l

Byte Order:            Little Endian

CPU(s):                4

On-line CPU(s) list:   0-3

Thread(s) per core:    1

Core(s) per socket:    4

Socket(s):             1

Model:                 4

Model name:            ARMv7 Processor rev 4 (v7l)

CPU max MHz:           1200,0000

CPU min MHz:           600,0000

BogoMIPS:              38.40

Flags:                 half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32

Another option is the inxi command (you might have to install it if not present with sudo apt install inxi). The flags to use are as follows:

inxi -C

Which produce the following output:

CPU:       Quad core ARMv7 rev 4 (v7l) (-MCP-) (ARM) 

           clock speeds: max: 1200 MHz 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz

edited 1 hour ago

answered 1 hour ago

Videonauth

24.7k1273102

edited 1 hour ago

answered 1 hour ago

Videonauth

24.7k1273102

answered 1 hour ago

Videonauth

24.7k1273102

answered 1 hour ago

Videonauth

24.7k1273102

Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?

– anvoice
1 hour ago

Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.

– Videonauth
1 hour ago

I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.

– anvoice
1 hour ago

Otherwise your only option is to check the model number and so on from the chips body. There is not really much more information left to get. You can try sudo inxi -MCmG but on my raspeberry I got not much info out of this.

– Videonauth
1 hour ago

1

As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.

– Videonauth
51 mins ago

|
show 1 more comment

Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?

– anvoice
1 hour ago

Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.

– Videonauth
1 hour ago

I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.

– anvoice
1 hour ago

Otherwise your only option is to check the model number and so on from the chips body. There is not really much more information left to get. You can try sudo inxi -MCmG but on my raspeberry I got not much info out of this.

– Videonauth
1 hour ago

1

As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.

– Videonauth
51 mins ago

Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?

– anvoice
1 hour ago

Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.

– Videonauth
1 hour ago

I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.

– anvoice
1 hour ago

Otherwise your only option is to check the model number and so on from the chips body. There is not really much more information left to get. You can try sudo inxi -MCmG but on my raspeberry I got not much info out of this.

– Videonauth
1 hour ago

As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.

– Videonauth
51 mins ago

|
show 1 more comment

anvoice is a new contributor. Be nice, and check out our Code of Conduct.

draft saved

draft discarded

anvoice is a new contributor. Be nice, and check out our Code of Conduct.

Thanks for contributing an answer to Ask Ubuntu!

Please be sure to answer the question. Provide details and share your research!

But avoid …

Asking for help, clarification, or responding to other answers.

Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.

draft saved

draft discarded

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Name

Required, but never shown

Name

Required, but never shown

This page is only for reference, If you need detailed information, please check here

搜尋此網誌

Ndtyhij