Distribution Coeffecient without concentrations












2












$begingroup$


From what I understand about distribution coefficient is straight from my book-- which does NOT give any practice examples-- is that:



D= CA(ext) ÷ CA(orig)



where CA(ext) and CA(orig) represent the total concentration of all analyte species present in the two phases regardless of chemical state. Below is a homework problem that I'm try to solve, but having no luck, since I'm not given any concentrations, only weight and volume.



In an extraction experiment, it is found that 0.0376 g of an analyte are extracted into 50 mL of solvent from 150 mL of a water sample. If there was originally 0.192 g of analyte in this volume of the water sample, what is the distribution coefficient?



The answer for this problem is 0.731%, but no matter which way I plug in the numbers that are given do I reach this answer. Any ideas on what I'm missing?










share|improve this question









New contributor




Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$

















    2












    $begingroup$


    From what I understand about distribution coefficient is straight from my book-- which does NOT give any practice examples-- is that:



    D= CA(ext) ÷ CA(orig)



    where CA(ext) and CA(orig) represent the total concentration of all analyte species present in the two phases regardless of chemical state. Below is a homework problem that I'm try to solve, but having no luck, since I'm not given any concentrations, only weight and volume.



    In an extraction experiment, it is found that 0.0376 g of an analyte are extracted into 50 mL of solvent from 150 mL of a water sample. If there was originally 0.192 g of analyte in this volume of the water sample, what is the distribution coefficient?



    The answer for this problem is 0.731%, but no matter which way I plug in the numbers that are given do I reach this answer. Any ideas on what I'm missing?










    share|improve this question









    New contributor




    Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
    Check out our Code of Conduct.







    $endgroup$















      2












      2








      2





      $begingroup$


      From what I understand about distribution coefficient is straight from my book-- which does NOT give any practice examples-- is that:



      D= CA(ext) ÷ CA(orig)



      where CA(ext) and CA(orig) represent the total concentration of all analyte species present in the two phases regardless of chemical state. Below is a homework problem that I'm try to solve, but having no luck, since I'm not given any concentrations, only weight and volume.



      In an extraction experiment, it is found that 0.0376 g of an analyte are extracted into 50 mL of solvent from 150 mL of a water sample. If there was originally 0.192 g of analyte in this volume of the water sample, what is the distribution coefficient?



      The answer for this problem is 0.731%, but no matter which way I plug in the numbers that are given do I reach this answer. Any ideas on what I'm missing?










      share|improve this question









      New contributor




      Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.







      $endgroup$




      From what I understand about distribution coefficient is straight from my book-- which does NOT give any practice examples-- is that:



      D= CA(ext) ÷ CA(orig)



      where CA(ext) and CA(orig) represent the total concentration of all analyte species present in the two phases regardless of chemical state. Below is a homework problem that I'm try to solve, but having no luck, since I'm not given any concentrations, only weight and volume.



      In an extraction experiment, it is found that 0.0376 g of an analyte are extracted into 50 mL of solvent from 150 mL of a water sample. If there was originally 0.192 g of analyte in this volume of the water sample, what is the distribution coefficient?



      The answer for this problem is 0.731%, but no matter which way I plug in the numbers that are given do I reach this answer. Any ideas on what I'm missing?







      equilibrium solutions analytical-chemistry extraction






      share|improve this question









      New contributor




      Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.











      share|improve this question









      New contributor




      Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      share|improve this question




      share|improve this question








      edited 2 hours ago









      andselisk

      16.6k654115




      16.6k654115






      New contributor




      Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      asked 2 hours ago









      Molly HahnMolly Hahn

      113




      113




      New contributor




      Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.





      New contributor





      Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






      Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






















          1 Answer
          1






          active

          oldest

          votes


















          2












          $begingroup$

          Molar concentration can be expressed via mass $m$ and volume $V$ all right:



          $$C_i = frac{n_i}{V_i} = frac{m_i}{M_iV_i}$$



          Analyte doesn't change during the extraction and its molar mass $M$ remains the same $(M_i = text{const})$ so the distribution coefficient $D$ can be rewritten as such:



          $$D = frac{C_mathrm{s}}{C_mathrm{w}} = frac{m_mathrm{s}V_mathrm{w}}{m_mathrm{w}V_mathrm{s}}$$



          where "s" refers to the solvent phase and "w" to aqueous phase.
          At equilibrium



          $$m_mathrm{w} = m_0 - m_mathrm{s}$$



          where $m_0$ is the initial mass of the analyte.
          Finally, the distribution coefficient is



          $$D = frac{m_mathrm{s}V_mathrm{w}}{(m_0 - m_mathrm{s})V_mathrm{s}} = frac{pu{0.0376 g}cdotpu{150 mL}}{(pu{0.192 g} - pu{0.0376 g})cdotpu{50 mL}} = 0.731$$






          share|improve this answer









          $endgroup$













            Your Answer





            StackExchange.ifUsing("editor", function () {
            return StackExchange.using("mathjaxEditing", function () {
            StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
            StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
            });
            });
            }, "mathjax-editing");

            StackExchange.ready(function() {
            var channelOptions = {
            tags: "".split(" "),
            id: "431"
            };
            initTagRenderer("".split(" "), "".split(" "), channelOptions);

            StackExchange.using("externalEditor", function() {
            // Have to fire editor after snippets, if snippets enabled
            if (StackExchange.settings.snippets.snippetsEnabled) {
            StackExchange.using("snippets", function() {
            createEditor();
            });
            }
            else {
            createEditor();
            }
            });

            function createEditor() {
            StackExchange.prepareEditor({
            heartbeatType: 'answer',
            autoActivateHeartbeat: false,
            convertImagesToLinks: false,
            noModals: true,
            showLowRepImageUploadWarning: true,
            reputationToPostImages: null,
            bindNavPrevention: true,
            postfix: "",
            imageUploader: {
            brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
            contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
            allowUrls: true
            },
            onDemand: true,
            discardSelector: ".discard-answer"
            ,immediatelyShowMarkdownHelp:true
            });


            }
            });






            Molly Hahn is a new contributor. Be nice, and check out our Code of Conduct.










            draft saved

            draft discarded


















            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fchemistry.stackexchange.com%2fquestions%2f110002%2fdistribution-coeffecient-without-concentrations%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown

























            1 Answer
            1






            active

            oldest

            votes








            1 Answer
            1






            active

            oldest

            votes









            active

            oldest

            votes






            active

            oldest

            votes









            2












            $begingroup$

            Molar concentration can be expressed via mass $m$ and volume $V$ all right:



            $$C_i = frac{n_i}{V_i} = frac{m_i}{M_iV_i}$$



            Analyte doesn't change during the extraction and its molar mass $M$ remains the same $(M_i = text{const})$ so the distribution coefficient $D$ can be rewritten as such:



            $$D = frac{C_mathrm{s}}{C_mathrm{w}} = frac{m_mathrm{s}V_mathrm{w}}{m_mathrm{w}V_mathrm{s}}$$



            where "s" refers to the solvent phase and "w" to aqueous phase.
            At equilibrium



            $$m_mathrm{w} = m_0 - m_mathrm{s}$$



            where $m_0$ is the initial mass of the analyte.
            Finally, the distribution coefficient is



            $$D = frac{m_mathrm{s}V_mathrm{w}}{(m_0 - m_mathrm{s})V_mathrm{s}} = frac{pu{0.0376 g}cdotpu{150 mL}}{(pu{0.192 g} - pu{0.0376 g})cdotpu{50 mL}} = 0.731$$






            share|improve this answer









            $endgroup$


















              2












              $begingroup$

              Molar concentration can be expressed via mass $m$ and volume $V$ all right:



              $$C_i = frac{n_i}{V_i} = frac{m_i}{M_iV_i}$$



              Analyte doesn't change during the extraction and its molar mass $M$ remains the same $(M_i = text{const})$ so the distribution coefficient $D$ can be rewritten as such:



              $$D = frac{C_mathrm{s}}{C_mathrm{w}} = frac{m_mathrm{s}V_mathrm{w}}{m_mathrm{w}V_mathrm{s}}$$



              where "s" refers to the solvent phase and "w" to aqueous phase.
              At equilibrium



              $$m_mathrm{w} = m_0 - m_mathrm{s}$$



              where $m_0$ is the initial mass of the analyte.
              Finally, the distribution coefficient is



              $$D = frac{m_mathrm{s}V_mathrm{w}}{(m_0 - m_mathrm{s})V_mathrm{s}} = frac{pu{0.0376 g}cdotpu{150 mL}}{(pu{0.192 g} - pu{0.0376 g})cdotpu{50 mL}} = 0.731$$






              share|improve this answer









              $endgroup$
















                2












                2








                2





                $begingroup$

                Molar concentration can be expressed via mass $m$ and volume $V$ all right:



                $$C_i = frac{n_i}{V_i} = frac{m_i}{M_iV_i}$$



                Analyte doesn't change during the extraction and its molar mass $M$ remains the same $(M_i = text{const})$ so the distribution coefficient $D$ can be rewritten as such:



                $$D = frac{C_mathrm{s}}{C_mathrm{w}} = frac{m_mathrm{s}V_mathrm{w}}{m_mathrm{w}V_mathrm{s}}$$



                where "s" refers to the solvent phase and "w" to aqueous phase.
                At equilibrium



                $$m_mathrm{w} = m_0 - m_mathrm{s}$$



                where $m_0$ is the initial mass of the analyte.
                Finally, the distribution coefficient is



                $$D = frac{m_mathrm{s}V_mathrm{w}}{(m_0 - m_mathrm{s})V_mathrm{s}} = frac{pu{0.0376 g}cdotpu{150 mL}}{(pu{0.192 g} - pu{0.0376 g})cdotpu{50 mL}} = 0.731$$






                share|improve this answer









                $endgroup$



                Molar concentration can be expressed via mass $m$ and volume $V$ all right:



                $$C_i = frac{n_i}{V_i} = frac{m_i}{M_iV_i}$$



                Analyte doesn't change during the extraction and its molar mass $M$ remains the same $(M_i = text{const})$ so the distribution coefficient $D$ can be rewritten as such:



                $$D = frac{C_mathrm{s}}{C_mathrm{w}} = frac{m_mathrm{s}V_mathrm{w}}{m_mathrm{w}V_mathrm{s}}$$



                where "s" refers to the solvent phase and "w" to aqueous phase.
                At equilibrium



                $$m_mathrm{w} = m_0 - m_mathrm{s}$$



                where $m_0$ is the initial mass of the analyte.
                Finally, the distribution coefficient is



                $$D = frac{m_mathrm{s}V_mathrm{w}}{(m_0 - m_mathrm{s})V_mathrm{s}} = frac{pu{0.0376 g}cdotpu{150 mL}}{(pu{0.192 g} - pu{0.0376 g})cdotpu{50 mL}} = 0.731$$







                share|improve this answer












                share|improve this answer



                share|improve this answer










                answered 2 hours ago









                andseliskandselisk

                16.6k654115




                16.6k654115






















                    Molly Hahn is a new contributor. Be nice, and check out our Code of Conduct.










                    draft saved

                    draft discarded


















                    Molly Hahn is a new contributor. Be nice, and check out our Code of Conduct.













                    Molly Hahn is a new contributor. Be nice, and check out our Code of Conduct.












                    Molly Hahn is a new contributor. Be nice, and check out our Code of Conduct.
















                    Thanks for contributing an answer to Chemistry Stack Exchange!


                    • Please be sure to answer the question. Provide details and share your research!

                    But avoid



                    • Asking for help, clarification, or responding to other answers.

                    • Making statements based on opinion; back them up with references or personal experience.


                    Use MathJax to format equations. MathJax reference.


                    To learn more, see our tips on writing great answers.




                    draft saved


                    draft discarded














                    StackExchange.ready(
                    function () {
                    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fchemistry.stackexchange.com%2fquestions%2f110002%2fdistribution-coeffecient-without-concentrations%23new-answer', 'question_page');
                    }
                    );

                    Post as a guest















                    Required, but never shown





















































                    Required, but never shown














                    Required, but never shown












                    Required, but never shown







                    Required, but never shown

































                    Required, but never shown














                    Required, but never shown












                    Required, but never shown







                    Required, but never shown







                    Popular posts from this blog

                    Knooppunt Holsloot

                    Altaar (religie)

                    Gregoriusmis